Sawdust Connection
carries the Microlux Gourd Saw, The Gourd Saw™, The Gourd Saw Kit, and Proxxon mini Jig Saw
that are perfect for wood workers, crafters and gourd artists.
Microlux Gourd Cross Cut
Saw is back! This is the greatest mini saw to do fine detail work.
This is ideal for doing filigree and other fine cutting that you can't do
with the Proxxon and the Gourd Saw.
The Gourd Saw™ made by
The Caning Shop is slightly bigger than the Microlux but smaller and more
light weight than the Proxxon. It uses the same blades as the Proxxon
so you have more versatility than the Microlux mini Jig Saw because the
Gourd Saw will cut through thick gourds. This Gourd Saw is perfect for
almost any project including fine detail cuts on gourds.
The Gourd Tool Kit includes all three
specially designed power tools for the gourd crafter. Inside a sturdy tool
case, you'll have the Gourd Saw™
with 6 saw blades, the Gourd Drill™
with an assortment of 6 engraving cutters, the Gourd Sander™
with 6 sanding sponges, and a powerful 15V AC-DC Transformer.
The
Proxxon
STS 12/E Jig Saw is the most versatile jig saw on the market and will
satisfy most of
your needs. It's ideal for woodworking and gourd crafting. The
jig saw comes with a round and flat base plate so it will work on curved
(such as gourds and bowls) as well as flat surfaces. It works better on
heavier and thicker materials than the Microlux gourd and other mini jig saws.
The Proxxon STS 12/E Jig Saw
is one of the best mini jig saws on the market and has been used by
woodworkers for years. Gourd artists find this mini jig saw to
perform well in most situations including thick gourds which require a
heavier duty jig saw. The Gourd Saw™
is smaller and lighter weight and also suitable for most situations but is
better for fine detail work on gourds.
The Carbide Gourd
cleaners are by far the best tool to clean your gourds. Yes,
they are expensive but they will LAST and most important they will turn
drudgery into a quick and very tolerable job. I use these and
absolutely love them. They make cleaning the inside of gourds a
whole lot easier!
PHONE ORDERS:
Sorry, but
we cannot accept credit
card orders over the phone. Because of the high cost of
processing unsecured (un-swiped credit card sales) to small business owners we
are no longer able to take credit cards over the phone. We recommend you
order directly online for the fastest service. I apologize for any
inconvenience this may cause.
If you do not wish to order on
line, please feel free to download our mail order form
Click here to get our mail order form
and send your order it. We process mail orders within 24 hours of receipt
to ensure you get your order promptly.
If you are in a hurry for your
order, ordering on our website is the fastest way and you have the option of
using your credit card, debit card or pay pal. Ordering is secure and
confidential...we do not receive your credit card information.
Shipping Information,
orders outside the USA, guarantee and returns
Microlux palm-size miniature power tools are ideal for model building,
dollhouse miniatures and other smaller-than-life projects. They're
versatile, dependable and powerful enough for the most demanding modeling
jobs. This is great for doing filigree work on gourds. Does not
work well on thick gourds. It does NOT have speed control. If
you wish to have speed control I recommend using it with the Proxxon 5 amp
Transformer. For heavier work I recommend the Proxxon
STS 12/E
Note: All
tools run on 12v DC and must be operated from a transformer (sold separately
below). Our variable speed transformers employ POWER BOOST,a special feedback circuitry that automatically boosts the power to
the tool when it is under load so that the speed remains constant. Our
transformers plug into standard 110v AC household outlet.
Gourd Carvers like our Cross
Saw, because it easily cuts through irregular, non-flat objects. The saw's
small, rounded shoe permits high maneuverability on both smooth and bumpy
surfaces and keeps the cutting line visible for increased accuracy. Includes
Allen wrench and 10 fine blades for soft woods and other craft items.
Specifications:
weight, 9.2 oz.; length, 3-1/2 inches; speed, 1,800 to 6,900 rpm; motor, 12v
DC, 1.0 amp.; max. cutting thickness, 9/32 inch. Use with variable speed
transformer #PX38704 listed below.
MSRP: $77.20
our price: $66.95
#82376 MICROLUX RIGHT ANGLE
SANDER
Microlux palm-size miniature
power tools are ideal for model building, dollhouse miniatures and other
smaller-than-life projects. They're versatile, dependable and powerful
enough for the most demanding modeling jobs.
Note: All
tools run on 12v DC and must be operated from a transformer (sold separately
below). Our variable speed transformers employ POWER BOOST,a special feedback circuitry that automatically boosts the power to
the tool when it is under load so that the speed remains constant. Our
transformers plug into standard 110v AC household outlet.
Heavy-Duty Right Angle
Disk Sander/Drill A versatile tool for removing rust, grinding
metal, shaping and smoothing wood, plastic, fiberglass...and for drilling
holes in places no other tool will go. Uses peel-and-stick sanding disks.
Includes semi-rigid disk mounting wheel for finishing flat surfaces, hex
wrench and 2 sanding disks.
Specifications:
weight 12 oz.; length 5 inches; disk dia. 2-3/8 inches; speed 400
to 3300 rpm; motor, 12v DC, 110 watt. Use with variable speed transformer
#PX38704 listed below.
2 each of 60, 120 and 240 grit
peel-and-stick sanding disks. 2-3/8 inches dia. Designed for use with #82376
Microlux Right Angle Disk Sander/Drill.
MSRP: $6.15
our price: $5.95
#82378 MICROLUX FLEXIBLE DISK MOUNTING WHEELS, 2-3/8 "
DIA. (SET OF 3)
Flexible disk mounting wheels
for finishing curved surfaces (very useful on gourds). Lets you keep sanding
disks of different grits mounted and ready to use. Set of 3. Designed for
use with #82376 Microlux Right Angle Disk Sander/Drill.
MSRP: $13.50
our price: $9.80
THE GOURD SAW
ITEM
DESCRIPTION
ORDER
#101 THE GOURD SAW™ 15 volt
The remarkable
Gourd Saw™
is smaller than the Minicraft or Proxxon saws, yet accepts their blades.
With its small, rounded foot, you can skillfully cut in the concave area of
the neck of the gourd and other areas inaccessible to the larger saws. The
small rounded foot does not obscure your vision. You'll easily be able to
follow your line when cutting. The on/off switch is comfortably placed for
convenient access. Its light weight (only 11 ounces) and smooth handling, at
4,500 strokes per minute, make the Gourd Saw™
the most enjoyable miniature saw for cutting gourds. Includes 2 fine saw blades.
The Gourd Saw™ is a 15-volt tool and requires a transformer (power
supply). Please note: THE SAW WILL NOT RUN WITHOUT A POWER SUPPLY. We
recommend the #104 Gourd Power Supply listed below for $25.95. We also carry adapter
cords if you already have a Proxxon (#70012 $4.95), Minicraft (#70003
$4.95) or Monster (#70012 $4.95) power supply (transformer).
This set contains the Gourd
Saw and the Proxxon 2 amp transformer and adaptor cord. We have a limited number of
these that we are offering at a reduced price. The Proxxon transformer
is a better quality transformer with more power than the Gourd Saw
transformer.
MSRP: $86.90
#102 COMPLETE GOURD SAW KIT
BEST SELLER
Kit Includes:
The Gourd
Saw™
4 coarse saw blades (PX-MB1750),
2 fine saw blades (MB1751),
15v Power supply
a sturdy canvas tool bag.
It’s all you need to make intricate cuts in your gourds.
Comes with The Caning Shop’s extended 3 year warranty.
MSRP: $84.95
OUR PRICE: $82.95
BACK IN STOCK
#105 GOURD SANDER SANDING
SPONGES
Set of 6 sponges
Long-lasting Abralon sanding sponges for the
Gourd Sander™. Use these sanding sponges
"wet" for extra long life. 2 each of 3 grits (180, 500, 1000).
A word about the Abralon Sanding Sponges. The actual size of the plate on
the Gourd Sander is 2” x 2.5.” Your sanding sponges have been cut from a 12”
disk (it’s the only way we can purchase them). Rather than making neat
2”x2.5” rectangles and throwing away the scrap, these are oversized giving you the extra material. Since with most of your gourd
sanding will be on a contour, you’ll make good use of the extra
material.
Be sure to use these pads wet and rinse them out when you’re finished. They
are very high quality and will last a very long time.
MSRP: $12.95
SALE PRICE: $7.95
PROXXON
ITEM
DESCRIPTION
ORDER
2#8534 PROXXON JIGSAW STS 12/E 12
VOLTS
The Proxxon STS 12/E is one
of the best mini jigsaw's on the market. It is the most versatile because it
handles most jobs. It comes with both a flat base plate and a ball
base plate for curved surfaces such as gourds. It also comes with one
coarse blade, one fine blade, one hex key with which to change blades, an
owners' booklet. Note: It requires the Proxxon transformer to use this saw.
I use and recommend the 5 amp variable speed transformer. It is the
most powerful, and the most popular.
The 'flat' base plate provides
the most stability and is most useful on flat surfaces; The round base plate
is the more maneuverable, allowing the clearest view when making intricate
cuts or cutting tight curves. The base plates are attached with a single
Phillips head screw; thus changing from one to the other is a simple matter.
The saw is a lightweight,
powerful machine and ideal for curved cuts in wood up to 10
mm (3/8"), non-ferrous metals up to
2.5 mm (3/32"), sheet metal up to 3.0 mm (1/8"). Its light weight makes it
easy to handle and thus allows for precise control of the cutting action.
Two year warranty.
Specifications:
Weight approximately 1 pound and 3 ounces - 7 1/2" long, 2" wide, and 3 1/2"
high. The electronic speed control is adjustable from 2,000 - 5,000 strokes
minute. (Maximum power input: 100 watts.)
Note: This saw requires a
transformer. We stock a 5 amp transformer (the most powerful, and the most
popular) but a smaller 2 amp transformer is available.
MSRP: $100.00
OUR PRICE: $64.95
BACK IN
STOCK
#38700 FOOT SWITCH FS
This attachment frees your hands for easy
on/off operation. I wouldn't be without this tool. It makes life
so much easier when you are using these power tools. It frees up your hands
so you can concentrate on the carving and not worrying about using the
on/off switch. I use this for my mini jig saws as well as my power carvers.
It can be used for all machines with a maximum power
consumption of 5/8 hp (500 W). Ideal for both portable and stationary
machines. The switch has a housing of fiberglass-reinforced NYLON. The
connecting cord is 3 ft. 21" in (250 cm) length and the output cord is 19.5"
(50 cm). Ideal for both portable and stationary machines.
If you are working with our 12 V hand-held machines, the Footswitch FS
connects directly into the transformer.
MSRP: $26.00
OUR PRICE: $24.95
#38704 HEAVY-DUTY 5 AMP TRANSFORMER
This Heavy Duty, 5 amp output,
Variable Speed Transformer provides the 12v DC power for all our palm-size
miniature power tools. The Transformer contains special feedback
circuitry that automatically boosts the power to the tool when it is under
load so that the speed remains constant.
The 5 amp transformer has
speed control, three standard (3 prong) slots for tools, one set of standard
5/32" (4mm) banana sockets (One positive, and one negative.), tool rest,
slots for bit storage, 6' power cord, and an owners' manual.
Provides twice as much power and
torque as other transformers and I highly recommend using
this one over the 1.8 volt Microlux transformer or the 3 amp transformer for
the gourd saw. Plugs into standard 110v AC
household outlet.
MSRP: $77.00
OUR PRICE: $58.95
#38706 HEAVY-DUTY 2 AMP TRANSFORMER
For use with 12v power tools,
such as the Proxxon Jigsaw STS 12/E, Micromot 50 and 50/E Rotary Tools and
other 12v Proxxon tools. Plugs into standard 110v AC household outlet.
Compact Design, 2 amps, LED for readiness use.
The 2 amp transformer has one
standard (3 prong) slot for a tool, tool rest, slots for bit storage, 6'
power cord,
Overload circuitry with auto
reset. Storage holes for bits. Foldable tool rest
and an owners' manual. The 2
amp transformer does not have an on/off switch, and must be unplugged after
each use.
This can be used with the
Gourd Saw. If buying it for the gourd saw, please be sure to order the
adaptor cord below,
#70012 adaptor cord.
MSRP: $32.00
OUR PRICE: $28.95
GET ALL 3 ITEMS ABOVE & SAVE
PROXXON SET
ALL THREE ITEMS LISTED ABOVE
JIGSAW, FOOT SWITCH & HD 5
amp TRANSFORMER
Buy all three of the above
items and save even more
MSRP: $203.00
price for all 3 items:
$145.95
PROXXON JIGSAW KITS
ITEM
DESCRIPTION
ORDER
#27501 Proxxon Jigsaw Kit
with Case
Contents:
28534 Proxxon Jigsaw STS 12/E
38706 Transformer NG 2/S
38700 Footswitch
Eight Jigsaw Blades - 5 Coarse, 3 Fine blades
Ball Shoe Attachment
Heavy-Duty Carrying and Storage Case
Owner's Manual
Features:
This kit contain everything you need to cut gourds. The kit comes with two
types of shoe attachments: The flat shoe attachment allows for more
stability; the ball shoe attachment allows for more maneuverability when
cutting the neck of the gourd or making intricate cuts and tight curves.
The shoe can easily be changed by removing the screw on the bottom of the
shoe.
The
jigsaw is ideal for cutting gourds. Cutting capacity: Wood up to 3/8",
Non-ferrous metal 3/32" The unit is variable speed between 2,000-5,000
strokes/min.
Included in the kit is a foot control switch allowing you to easily start
and stop your jigsaw by simply pressing your foot on the switch. The 2
amp NG 2/S transformer is powerful enough to handle most of your gourd
needs. The carry and storage case is heavy-duty, use it to take to take
gourd classes or to store your jigsaw when not in use
MSRP: $197.95
our price: $144.95
includes
FREE SHIPPING in the
continental USA
(This
will ship directly from the distributor)
#27502 Proxxon Jigsaw Kit
without case
Features:
This kit is exactly the same as the kit above but without the heavy-duty
case. It comes packaged in a corrugated cardboard box.
Features:
This kit contain everything you need to cut gourds. The kit comes with two
types of shoe attachments: The flat shoe attachment allows for more
stability; the ball shoe attachment allows for more maneuverability when
cutting the neck of the gourd or making intricate cuts and tight curves.
The shoe can easily be changed by removing the screw on the bottom of the
shoe.
The jigsaw is ideal for cutting gourds. Cutting capacity: Wood
up to 3/8", Non-ferrous metal 3/32". The unit is variable speed
between 2,000-5,000 strokes/min.
MSRP: $206.50
our price: $164.95
INCLUDES
FREE SHIPPING IN THE
CONTINENTAL USA
WE HAVE A LIMITED NUMBER IN STOCK FOR
IMMEDIATE SHIPMENT
MINI TOOL ADAPTOR CORDS
Adaptor cords to use your
favorite tools
ITEM
DESCRIPTION
ORDER
#70003 ADAPTOR CORD
This will allow you to use the
Gourd Saw™,
Gourd Drill™
or Gourd Sander™ with any Minicraft transformer
Price: $4.95
#70012 ADAPTOR CORD
This will allow you to use the
Gourd Saw™,
Gourd Drill™
or Gourd Sander™
on a Proxxon or Microlux Monster transformer.
Sometimes the Proxxon or Microlux Monster will grip a
pin as you unplug the saw, leaving a pin in the hole and ruining the saw's
cord. I recommend plugging the adaptor cord in permanently into the
Proxxon or Microlux Monster transformer and then plugging the
Gourd Saw™,
Gourd Drill™
or Gourd Sander™ directly into
the cord.
Price: $4.95
BLADES FOR MINI JIGSAWS & GOURD
SAWS
These are replacement blades
for the Proxxon and Microlux
ITEM
DESCRIPTION
ORDER
PX28054 - PROXXON COARSE JIGSAW BLADES
(PKG. OF 2)
Standard Steel Blade for
Proxxon Jig Saw. For cutting hard and soft wood, fiberglass-reinforced
materials and various soft plastics. Teeth are alternately set and
sharpened. Pitch: 1/16 inch. Thickness 1/64 inch. Length: 2-1/4 inch.
Package of 2 blades.
These are
interchangeable with the Proxxon, Minicraft and the Gourd Saw brands.
MSRP: $7.00
OUR PRICE: $3.95
PX28056 - PROXXON FINE JIGSAW BLADES (PKG. OF 2)
High Speed Steel Blade for
Proxxon Jig Saw. For cutting metals, especially aluminum and softer alloys,
fiberglass, Plexiglas and insulating materials. Teeth are alternately set
and sharpened. Pitch: 3/64 inch. Thickness 1/64 inch. Length: 2-1/4 inch.
Package of 2 blades.
These are interchangeable with the Proxxon, Minicraft and the Gourd Saw
brands.
MSRP: $8.00
OUR PRICE: $4.75
PX-MB1750 - COARSE
JIGSAW BLADES
(PKG. OF 4)
MB1750 Jigsaw Blades for gourds, wood and plastics.
These are interchangeable with the Proxxon, Minicraft and the Gourd Saw
brands.
MSRP: $5.75
OUR PRICE: $5.50
PX-MB1751 - FINE JIGSAW BLADES
(PKG. OF 3)
MB1751
Jigsaw Blades for gourds and metals.
These are interchangeable with the Proxxon, Minicraft and the Gourd Saw brands.
MSRP: $5.75
OUR PRICE: $5.50
BLADES FOR MICROLUX MINI GOURD/CROSS
SAW
These are replacement blades
for the Microlux mini jig saw
ITEM
DESCRIPTION
ORDER
ML84563 - MICROLUX
COARSE JIGSAW BLADES (SET OF 10)
IN STOCK NOW!
For Microlux Gourd/Cross Saw.
For cutting hard and soft wood, fiberglass-reinforced materials and various
soft plastics. Teeth are alternately set and sharpened.
MSRP: $8.00
OUR PRICE: $6.70
ML15244 - MICROLUX
FINE JIGSAW BLADES (SET OF 10)
IN STOCK NOW!
For Microlux Gourd/Cross Saw. For cutting metals, especially aluminum and softer alloys,
fiberglass, Plexiglas and insulating materials. Teeth are alternately set
and sharpened. .
"Pyrography 101" is a
registered domain name owned by this website and the original author,
Nedra Dension.
"Pyrography 101" is
the original title of the book and online pyrography tutorial series,
"Pyrography 101" that was created, written, originated and published
on
this website in 2002
and in print in 2003 by the artist and author, Nedra Denison.
Nedra Denison has been recognized as the originator of the "Pyrography
101"
title and should not to be
confused with other pyrographers who attempt to use this title for
their own pyrography lessons or
tutorials
on their websites and videos.
The title of the book, it's
contents and
tutorial series, "Pyrography 101" is protected under the law.
This website was last updated
3/12/2010
This website was
designed, created and maintained by Nedra Denison. If you have problems with
this website, please
contact the webmistress
